Logo
RU
+7 (347) 294-88-53
Главная
Technologies
Science
Team
Achievements
Contact Us
...
    • Главная
    • Technologies
    • “Polyfix” entomological glue

    “Polyfix” entomological glue

    “Polyfix” entomological glue (Technical specifications 2387-002-55841212-2002)

    А waste-free technology has been developed for the production of non-toxic environmentally friendly entomological glue "Polyfix", based on the by-product of the production of polyethylene - low molecular weight polyethylene LMWP-2 - (Patent 2236129).

    PolyfixThe glue is intended for the manufacture of pheromone, color and other glue traps used to control harmful insects in everyday life, agricultural and industrial production.

    Due to the non-drying adhesive surface of the trap, insects are reliably fixed, and the use of various attracting agents (pheromones, colors of a certain length, a wave, attractants) allows to selectively capture only sensitive individuals. This makes it possible to monitor them and significantly reduces the consumption of insecticides.

    Glue traps in the form of trapping belts applied to a tree trunk, prevent the migration of insects up the trunk.

    Entomological glue with increased viscosity and increased adhesion can be used in traps for small rodents.

    The use of glue traps eliminates the use of harmful chemicals, therefore, such traps are used particularly widely in greenhouses.

    “Polyfix” glue is a low- volatile viscous mass with a flash point above 190 ° C.

    "Polyfix" glue refers to low-toxic products of the fourth hazard class, does not irritate the skin, does not have sensitizing properties and a cumulative effect, does not irritate the upper respiratory tract.

    On physico-chemical and performance indicators "Polyfix" glue meets the requirements and standards listed in the table.


    Indicator

    Rule,

    (Technical specifications 2387-002-55841212-2002)

    Appearance

    Homogeneous, viscous vaseline or honey-like liquid of yellow or brown color, without foreign inclusions

    Stickiness with a uniform separation at 20 ± 5 ° С, MPa, not less:

    0,003

    Maintaining of stickiness during operation after 30 days,%, not less

    90

    Before applying the glue is heated to a temperature of 40-70 ° C and evenly applied to the working surface of the trap using rollers, a spatula, etc. in the form of film with a thickness of 0.2-1 mm.

    The glue surface remains sticky for almost unlimited time provided that sticking of mechanical impurities to the surface (debris, dust, etc.) is avoided.

    "Innovation Center" Chemteq" LLC, Ufa City (http://chemteq.ru). produces and sells "Polyfix" glue.

    We are also ready to sell glue production technology and supply the necessary equipment.

     

    glp1.jpg gls

     

    Logo
    +7 (347) 294-88-53
    Главная
    Technologies
    Technologies
    • PLASTICIZERS
      • NON-PHTHALATE PLASTICIZERS
      • Norbornenecarboxylate plasticizer based on C5 fraction isolated from liquid pyrolysis products
      • Cyclohexene dicarboxylate plasticizer based on the piperylene fraction and DRBA
      • Mixed plasticizer based on C5-fraction isolated from liquid pyrolysis products
      • TEREPHTALIC PLASTICIZERS
      • Terephthalate plasticizer based on a by-product of the production of dimethyl terephthalate and waste production of butyl alcohols
      • Terephthalate plasticizer based on a by-product of the production of dimethyl terephthalate and fusel oils
      • Terephthalate plasticizer based on a by-product of polyethylene terephthalate production and waste of production of butyl alcohols
      • DOTP plasticizer based on polyethylene terephthalate production waste and 2-ethylhexanol production waste
      • DOTP plasticizer based on intermediate production of polyethylene terephthalate - technical terephthalic acid
      • DOTP plasticizer based on terephthalic acid obtained from recycled polyethylene terephthalate
    • INTEGRATED PROCESSING OF LIQUID PYROLYSIS PRODUCTS
      • TECHNOLOGY FOR PYRETROID INSPECTICIDE CYPOTHRIN BASED ON INDEN FROM C9 FRACTION OF LIQUID PYROLISIS PRODUCTS
      • THE PROCESSING OF C6 BENZENIC FRACTION WITH MALEIC ANHYDRIDE RECEIVING
      • THE PROCESSING OF C7-C9 FRACTION WITH OBTAINING LIGHT PETROLEUM POLYMERIC RESINS AND SOLVENT
      • THE PROCESSING OF C8-C9 FRACTION WITH OBTAINING POLYMERIC PRODUCT - STYROMAL
      • PROCESSING OF OF PYROLYSIS HEAVY RESIN (PHR)
    • INTEGRATED PROCESSING OF BOTTOM RESIDUES OF PETROCHEMICALS (KON-92)
    • INTEGRATED PROCESSING OF BOTTOM RESIDUES OF BUTYL ALCOHOLS DISTILLATION
    • “POLYFIX” ENTOMOLOGICAL GLUE
    • COLD ROOF WATERPROOFING MASTIC BASED ON CHLORESULFOPOLETHYLENE (CSPE)
    • PETROCHEMICAL SOLVENT A-120/150
    • PVC PLASTISOLS FOR APPLYING PROTECTIVE COATINGS
    • CALCIUM POLYSULFIDE
    • THE PRODUCTION OF PLASTIC GREASE
    • CETANE-RAISING ADDITIVES FOR DIESEL FUEL
    • ORGANIC SULFONIC ACIDS
    Science
    Science
    • New Plasticizers
    Team
    Achievements
    Achievements
    • Patents
    • Know-how
    • Publications
    Contact Us
    ...
      MAIN
      Science
      • New Plasticizers
      Team
      Achievements
      • Patents
      • Know-how
      • Publications
      Contact Us
      Technologies
      • PLASTICIZERS
        • NON-PHTHALATE PLASTICIZERS
        • Norbornenecarboxylate plasticizer based on C5 fraction isolated from liquid pyrolysis products
        • Cyclohexene dicarboxylate plasticizer based on the piperylene fraction and DRBA
        • Mixed plasticizer based on C5-fraction isolated from liquid pyrolysis products
        • TEREPHTALIC PLASTICIZERS
        • Terephthalate plasticizer based on a by-product of the production of dimethyl terephthalate and waste production of butyl alcohols
        • Terephthalate plasticizer based on a by-product of the production of dimethyl terephthalate and fusel oils
        • Terephthalate plasticizer based on a by-product of polyethylene terephthalate production and waste of production of butyl alcohols
        • DOTP plasticizer based on polyethylene terephthalate production waste and 2-ethylhexanol production waste
        • DOTP plasticizer based on intermediate production of polyethylene terephthalate - technical terephthalic acid
        • DOTP plasticizer based on terephthalic acid obtained from recycled polyethylene terephthalate
      • INTEGRATED PROCESSING OF LIQUID PYROLYSIS PRODUCTS
        • TECHNOLOGY FOR PYRETROID INSPECTICIDE CYPOTHRIN BASED ON INDEN FROM C9 FRACTION OF LIQUID PYROLISIS PRODUCTS
        • THE PROCESSING OF C6 BENZENIC FRACTION WITH MALEIC ANHYDRIDE RECEIVING
        • THE PROCESSING OF C7-C9 FRACTION WITH OBTAINING LIGHT PETROLEUM POLYMERIC RESINS AND SOLVENT
        • THE PROCESSING OF C8-C9 FRACTION WITH OBTAINING POLYMERIC PRODUCT - STYROMAL
        • PROCESSING OF OF PYROLYSIS HEAVY RESIN (PHR)
      • INTEGRATED PROCESSING OF BOTTOM RESIDUES OF PETROCHEMICALS (KON-92)
      • INTEGRATED PROCESSING OF BOTTOM RESIDUES OF BUTYL ALCOHOLS DISTILLATION
      • “POLYFIX” ENTOMOLOGICAL GLUE
      • COLD ROOF WATERPROOFING MASTIC BASED ON CHLORESULFOPOLETHYLENE (CSPE)
      • PETROCHEMICAL SOLVENT A-120/150
      • PVC PLASTISOLS FOR APPLYING PROTECTIVE COATINGS
      • CALCIUM POLYSULFIDE
      • THE PRODUCTION OF PLASTIC GREASE
      • CETANE-RAISING ADDITIVES FOR DIESEL FUEL
      • ORGANIC SULFONIC ACIDS
      ...
        © 2025 Eco-friendly petrochemistry
        Privacy Policy
        development and promotion — 3 грани дизайна